Glock Dovetail Optic Mounting Kit

Glock Dovetail Optic Mounting Kit

USD $ 74.99

SKU: VTSS-GL Category: Tags: ,
Weight 45 g
Dimensions 16 × 9 × 0.2 cm

4340 ultra-high strength steel


Glock® RDO Mounting Plate

Kit Content

1x Versa Tactical SigntSecure™ optic mounting plate for Glock
2x Expander screws
2x Optic retention screws
1x HEX driver

42 in stock

Add To Compare List

Product Overview

Basic Info.

Glock Dovetail Optic Mounting Kit

Unlock your Glock pistol's true potential with the Glock Dovetail Optic Mounting Kit from Versa Tactical, a game-changer for firearm enthusiasts, competitive shooters, and anyone seeking unparalleled accuracy. This meticulously engineered Glock Dovetail Optic Mount seamlessly bridges the gap between your trusty Glock and cutting-edge optics, transforming your handgun into a precision instrument without any custom slide modifications.

At the heart of this kit is the a Glock red dot mount, specifically designed for Glock 19 and other compatible models. Crafted from ultra high strength 4340 steel, it ensures uncompromising durability and stability. Its ingenious dovetail optic mount design enables easy installation, replacing your stock rear sight while seamlessly integrating your preferred red dot sight. No slide modifications are required.

Designed with the discerning shooter in mind, this kit not only improves your accuracy but also elevates the aesthetics of your Glock pistol. The Glock slide, when paired with red dot sight, presents a sleek, modern profile that complements your firearm's performance.

Don't miss the opportunity to enhance your handgun capabilities with this Glock dovetail optic mounting kit. Upgrade your handgun, improve your shooting, and experience the advantage of rapid target acquisition that red dot sight offers. Elevate your game, secure your kit today, and experience the difference firsthand. With competitive pricing and a commitment to quality, Versa Tactical helps to make sure you are ready for any challenge that comes your way, shot after shot.

Versa Tactical Trijicon RMR/RMR HD/SRO/RCR Glock dovetail red dot mounting kit

Compatible with the following GLOCK models:

  • 9mm - G17,G19,G26,G34,G45
  • 10mm Auto - G20,G29
  • .357 - G31,G32,G33
  • .40 SW - G22,G23,G24,G27,G35
  • .45 G.A.P. - G37,G38, G39
  • .45 Auto - G21,G30,G36,G41


 Compatible with the following optics:

  • Trijicon RMR/SRO/RMR HD/RCR
  • Holosun 407C/407C X2 507C/507C X2 508T/508T X2
  • SwampFox Liberty/Justice/Kingslayer 1x22
  • Vector Optics Frenzy 1x22x26
  • Riton X3 Tactics PRD/PRD2(3TPRD2)
  • Athlon Midas TSR1-M
  • Hi-Lux TD-3(C)
  • Scorpion RGD-306 UT


Installation Instructions:

  • Remove the original rear sight
  • Install the Glock red dot mounting plate by sliding it into the original dovetail sight mount. This operation might require pressing the mount into place or using a rubber hammer.
  • Install and tighten the hardened HEX expander screws on the top of the dovetail mounting plate. Make sure the screws are tight enough to sit flush with the mounting plate. Do not over-tighten
  • Place your optic onto the mounting plate.
  • Secure the optic with two hardened HEX screws by tightening them down to the recommended 12 inch pounds of torque.
  • We recommend that you use Blue Loctite to prevent the optic from loosening due to recoil.

Download Installation Manual


Please note! This mount will not work with fake RMR/SRO optics


This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models

1 review for Glock Dovetail Optic Mounting Kit

  1. G.U

    I bought a RDS Dovetail Mount from Versa Tactical to see if I can skip the expensive machining and refinishing on my Glock 17 aftermarket VDI Brawler Slide.
    Shipping was very fast and upon receiving the item, I laid all parts on the table to check if all is complete. And it is.
    I have already removed my front and rear sight and with a polyurethane hammer and a vice to hold the slide,
    I had to drift the VT mount on the groove of the rear dovetail.
    It took a few blows to Center the mount, nothing to worry about since the bottom of the mount has a clear centerline guide.
    Once all is lined up, I placed the screws which have blue Loctite on them and put in my Holosun 507 Competition Optic.
    I checked if there’s any play or movement and the mount is super snug.
    I would recommend this setup if you want to save a little on the cost of machining of your slide. This one works as described.

    Vancouver, BC

Only logged in customers who have purchased this product may leave a review.


Your Product Basket

Quantity: 0 Items: 0
The Cart is Empty
No Product in the Cart!
USD $ 0.00
USD $ 0.00
USD $0.00